Filter
Top Products
14
2. Use the
▲
and
▼
or and buttons and select SEARCH TIME.
Then press
or
▲
again to make the selection.
3. In the SEARCH TIME, you may now select the date and time from where you want to begin
the video playback. Use the
▼
▼
and
▼
▼
buttons to move the selection to the left and
right. Use the
▲
and
▼
or and buttons to select the date and
time. Then press
or
▲
again to make the selection.
4. To start video playback, the time in second must be set. Use the
▼
▼
buttons to move the
selection to the left most. Use the
▲
and
▼
or and buttons and
select the time in second. Then press
or
▲
.
EVENT LIST (search by condition):
1. In the selected HARD DISK, press
or
▲
. Then, use the
▲
and
▼
or
and buttons to select
MASTER
or
SLAVE
. Press
or
▲
again to make the selection.
MASTER
EVENT LIST
HARD DISK :
2. Use the
▲
and
▼
or and
buttons to select from the list. Press
or
▲
again to make the selection.
3. Listed below are the following recording
conditions:
EVENT LIST
HARD DISK : MASTER
S
A
2006 / 05 / 03
2006 / 05 / 03
13 : 26 : 34
13 : 00 : 01
13 : 26 : 50
13 : 16 : 46
A 2006 / 05 / 03
12 : 00 : 01 13 : 00 : 01
B 2006 / 05 / 03
11 : 48 : 37 12 : 00 : 00
A 2006 / 05 / 03
11 : 30 : 23 11 : 31 : 18
A 2006 / 05 / 03 11 : 29 : 47 11 : 30 : 13
S 2006 / 05 / 03
11 : 28 : 55 11 : 28 : 58
B 2006 / 05 / 03
11 : 28 : 33 11 : 28 : 55
A 2006 / 05 / 03 11 : 25 : 41 11 : 28 : 32
A 2006 / 05 / 03
11 : 23 : 26 11 : 23 : 30
A – Always Recording
It records non-stop and automatically continue recording when interrupted.
S – Sensor Recording
It records when the sensor has activated.
M – Motion Recording
It records when any movement is detected(for EB1504 MPEG4
+
only)
B – Button Recording
It records when the
REC
record button is pressed.
4. The “” play symbol would appear beside the channel number when you are in playback
mode.