3. Getting Started
3. GETTING STARTED
Overview
• Powering the Base Unit on an d off
•BasicUse
• Advanced Use
• Use of an iOS device with ClickShare Link
• User Interface
• Capture mode: detailed - fast
• Shared desktop: primary - extended
•Audioconfiguration
• Pairing
3.1 Powering the Base Unit on and off
About power mode
You can power on and off the Base Unit and bring the system in standby mode. In standby mode the system m utes the ou tput signal
to the display. If yo ur display supports this, it will automatically enter power sav ing mode.
To power on the Base Unit or a wake it from standby
1. Whe n the Base Unit is shut down, set the rocker switch a t the back of the Base Unit to “I”.
Refer to image 3-1.
Image 3-1
Rocker switch
2. If the system does not start up automatically, push the standby button shortly.
Refer to image 3-2.
R5900001 CLICKSHARE 08/07/2013
13