Filter
Top Products
EN55022/CISPR22 Class A ITE (Information Technology Equipment)
Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE limits. S uch equipment should not
be restricted in its sale but the following warning shall be included in the ins tructions for u se:
Warning : This is a class A product. In a domestic environment this product may cause radio interference in which case the us er m ay be
required to take adequate measures.
Federal Communication Commission Interference Statement
You are cautioned that changes or modific ations not expressly approved by the part r esponsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits a re designed to provide reasonable protection against harmful interference when the equipm ent is operated in a com mercial
environment. This equipm ent generates, uses, and can radiate radio frequenc y energy and, if not installed and used in accordance with
the instruction manual, may cause h armful interference to radio communications. Operation of this equipment in a residentia l area is likely
to cause harmful interference in which c ase the u ser w ill be required to correct the interference at his own expense.
If this equipment does cause interference with radio communications services, which can be determined by turning the equipm ent off and
on, you are encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and rec eiver.
• Connect the equipm ent into an outlet on a circu it different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techn ician for help.
This device com plies with Part 1 5 of the FCC Rules. Operation is subject to the
following two conditions:
1. this device may not cause harmful interference, and
2. this device m ust accept any interference received, inc luding interference that m ay caus e undesired operation of the device.
FCC RF Radiation E xposure Statement: This device is c apable of o perating in 802.11a m ode. For 8 02.11a devices op erating in the
frequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to red uce an y potential harmful interference for Mobile Satellite
Services (MSS ) in the US. WIFI Access Points that are capable of allowing your device to op erate in 802.11a mode (5 .15 - 5.25 GHz band)
are optimized for indoor use only. If your WIFI network is capable of operating in this mode, please restrict your WIFI use indoors to not
violate federal regulations to protect Mobile Satellite Services.
Base Unit FFC ID: RYK-WPEA-1 21N
Button FCC ID: 2AAED -CLSB TN
Compliance Anatel (Brasil)
1. Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pe la Resolução nº 242/2000, e atende
aos requisitos técnicos aplicados, incluindo os limites de exposição da taxa de absorção específica referente a campos elétricos,
magnéticos e eletromagnéticos de radiofreqüência de acordo com as resoluções nº 303/2002 e 533/2009. Para maiores informaç ões,
consulte o site da Anatel - w
ww.anatel.gov.br
2. Este equipam ento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, m esm o de estações
do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
Canada, Industry Canada (IC) Notices
This device c omplies with Industry Canada licence-exempt RSS standard(s). O peration is s ubject to the following two conditions: (1) this
device may not cause interference, and (2) this device m
ust accept an y interference, including interference that may caus e undes ired
operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Barco
Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
Base Unit IC ID: IC: 410 4 A-AR5BHB116
Button IC ID: 9393B-CLSBTN
IC Antenna statement
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential r adio interference to other users, the antenna type and its gain should
be so chos en that the equivalent isotropic
ally radiated power (e.i.r.p.) is not more than that nec essary for successful comm unication.