Filter
Top Products
Using the Web Configuration and Management Interface
Manual Documentation Number: PES1A/PESV1A-2907m 17
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Figure 11. Network, IP Settings Page
IP Settings
The IP Settings section allows you to select between dynamic or static IP
addressing. The PES1A/PESV1A’s default setting is Obtain an IP address
automatically using DHCP, or dynamic IP addressing.
When the PES1A/PESV1A is first connected it will try to obtain an IP address
automatically. If it fails, it will assign an IP address to itself using the Automatic
Private IP Addressing (APIPA) protocol. You can re-configure the
PES1A/PESV1A for static IP address by selecting Use the following IP
address and assign the IP address yourself.
If Use the following IP address: is selected, you are choosing static IP
addressing. When this option is selected the IP Address, Subnet Mask and
Default Gateway text boxes become available. You must determine the
appropriate parameters and enter them yourself. (If you do not know what to
enter ask your network administrator for assistance.)
To implement any changes in this section, click Apply. A page will appear
asking you to Reboot the PES1A/PESV1A so that the changes can take
effect.
Network Services Settings
The Network Services Settings section allows you to enable or disable
several common network services and configure their associated ports.
Typically you will not have to change these settings.