Filter
Top Products
Using the Web Configuration and Management Interface
18 Manual Documentation Number: PES1A/PESV1A-2907m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Advanced Network Settings
The Advanced Network Settings section allows you to fine-tune the
network connection. Typically these setting will not need to be changed.
Consult the web-based tutorial and/or your network administrator for more
information on Network Services and Advanced Network settings.
Configuring the Serial Port
The Serial Port Configuration page displays information about the serial
port on your PES1A/PESV1A, including its description, its profile (operating
mode) and serial settings (baud rate, data bits, parity, stop bits). You will
have to configure these parameters to set up your system for the type of
operation required and to match the parameters of the serial device to which
the PES1A/PESV1A is connected.
To open the Serial Port Configuration page, under the Configuration
menu click Serial Ports. When you first access this page a list of ports, their
description, profile and serial configuration appears. (If the PES1A/PESV1A
has not yet been configured for the first time the Profile column may indicate
<Unassigned>.)
To access detailed settings for the PES1A/PESV1A serial port, click Port 1.
The Serial Port Configuration page that appears includes three sections
with hyperlinked menu bars.
• Port Profile Settings
• Basic Serial Settings
• Advanced Serial Settings
Port Profile Settings
The Port Profile Settings section displays the current serial port mode of
operation, a description of that profile and a hyperlink to Change Profile…
Click the Change Profile… menu bar to open the Select Port Profile page.
Any of eight possible serial port profiles can be selected.