Filter
Top Products
Using the Web Configuration and Management Interface
Manual Documentation Number: PES1A/PESV1A-2907m 25
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
GPIO is not supported in the PES1A/PESV1A but it is possible to use the Send
alarms based on GPIO pin states feature to generate alarms based on the
condition of some RS-232 hardware handshake lines. For assistance in
implementing this feature contact B&B Electronics Technical Support at 815
433-511 or support@bb-elec.com
To Send alarms based on serial data pattern matching, select that option
and type a character string into the text box provided.
Alarm Destinations
Alarm Destinations allows you to specify where to send alarm notification
emails, their priority and subject title. Type the information into the Mail to
email address, CC address, set the Priority and type in the Subject line.
To send an SNMP trap, select Send SNMP trap to following destination
when alarm occurs and type the destination IP address for the SNMP trap.