Filter
Top Products
11
Erase Channel List :With this option,
you can delete all channels in the existing
channel list to store only the new channels in
the desired frequency into the memory.
Note: You can also access Manuel Tuning
menu from the System Menu submenu
under Digital Features menu.
6.3.3-First Time Installation
If you select this function, all channel
information in the memory will be deleted.
The OSD where country selection shall be
made is displayed and channel search is
made automatically. First, digital channels
are searched. You can start Analog channel
search by pressing the OK button after the
digital channel search is completed.
6.3.4-Program Table
With the program table, you can see the
stored channels in a list, switch between
TV channels and Radio channels or create
your favorite channels list for 6 TV and Radio
channels according to your preference.
Select the PROGRAM TABLE item
from the main menu by means of Up/
Down movement buttons to access
program table and press OK button
to confirm. Program Table will be
displayed. You can also access the program
table menu directly by pressing the OK
button on your remote control when there is
not any open menu on the screen.
Manual Search Parameters
Channel
Frequency
Update of Channel List
21
474000
Add channels
Change
Start
Back
Highlight the Channel tab by means
of Up/Down buttons and directly
enter the frequency number of the
channel you want to search, if you
know, by using the numeric keys on
the remote control. If you don’t know
the frequency number, you can scan
frequencies by using the Left/Right
movement buttons. After entering
the frequency you want to search,
highlight Update of Channel List tab with
Up/Down movement buttons and select
either one of Add channels, Replace
channels or Erase channel list items,
then press OK button to start searching.
Channels will be searched or changed
according to the search method you have
chosen.
Channel Search
Waiting for signal...
Service found:
TV: 0
Radio: 0
Other: 0
Stop Search
Add Channels : With this option, the new
channels in the frequency which is desired to
be manually searched will be scanned and
added to the existing channel list.
Replace Channels : With this option, you
can update the existing channel list with the
modifications made by the broadcasting
enterprise.
All
1 Kanal
2 Kanal
3
4
5
Select
Edit List
Back
Change List
be displayed. Select MANUAL TUNING
tab and confirm by pressing the OK button.
Manual Search Parameters menu will be
displayed.