Filter
Top Products
16
6.4.4.1-Switching the locations of
the stored channels
Select the program you would like to
relocate by pressing the Up/Down or
Left/Right movement buttons. Press
the “GREEN” button. The program
you selected will appear in red.
Highlight the program number you
would like to relocate by pressing the
Up/down or Right/left movement
buttons. Finish the relocation process
by pressing the “RED” button. To
cancel relocating the channels, press
the “GREEN” button. When you
press “RED” button, the channel
in the first program number you
selected has been moved to your second
selected program number and the channels
between both program numbers have been
shifted to the initially selected program
number. After setting is complete, press the
EXIT button to exit the menu.
6.4.4.2-Deleting a stored channel
Select the program you would like to
delete by pressing the up/down or
right/left movement buttons. Press
the “BLUE” button. You may perform
the deletion process by pressing the
“RED” button or you may abort the
deletion process by pressing the
“GREEN” button. Once you pres
the “RED” button, the selected program is
deleted and all the following channels are
transferred to previous program number.
After setting is complete, press the EXIT
button to exit the menu.
6.4.4.3-Skipping a stored channel
In the event that you do not wish to
see certain programs while navigating
through the channels using the
PR+/PR- buttons, then you can
use this function. Select the program that
will be hidden by pressing the up/down
or right/left movement buttons. Press the
“RED” button. The name of the program
to be skipped shall appear in red. You may
perform this procedure for more than one
program. To view the skipped program,
directly enter the program number using the
numeric buttons. To cancel the program
skipping process, press again the “RED””
button. After setting is complete, press the
EXIT button to exit the menu.
6.4.4.4-To name the channels
You can assign your program or
programs of choice the names that
have a maximum of five characters.
Select the program you would like
to name from the Program Table
by pressing the up/down or right/
left movement buttons. Press the
“YELLOW” button. An empty
space appears beside the channel
for which you would like to specify
name information. Here, choose
the desired letter, number or sign using the
up/down movement buttons. For the second
character, press the right movement button
and then select the desired letter, number
or sign again with the up/down movement
buttons. After entering all the characters,
store the name you have written in the
memory by pressing the “RED” button. To
write names for any of the other programs,
simply repeat the above procedure. To
cancel the program naming process, press
the “GREEN” button. If you want to exit
the menu, simply press the EXIT button. If
the program is not named, then the channel
number of that program will be displayed
automatically.