Filter
Top Products
23
9.3-Connecting an external equipment via YPBPR connection
Rear view of TV
DVD
Picture connection
Sound connection
YPBPR (Component Input): When a connection is made via VGA socket with VGA to
YPBPR, select YPBPR option from the Source menu and press the OK button to display
the picture. Your TV will switch to the selected source.
9.4-Connecting an external equipment
via HDMI connection
Side view of TV
DVD
SATALLITE RECEIVER
GAME CONSOLE
HDMI: When a connection is made via HDMI socket, select the HDMI input you connected
through from the Source menu and press the OK button to be able to display these
pictures. Your TV will switch to the selected source.
Connect to the HDMI input at the back of your TV by using the connector located on your PC
or your digital video-transmission device with a suitable cable (not supplied with the TV).
Note: To be able to watch an image in the HDMI mode, your computer must be equipped
with a HDMI graphic card.
You may display the resolution information by pressing the INFO button.
9.4.1-HDCP
Your TV supports HDCP feature. To use this feature, you must set up a connection to your TV
set’s HDMI video port and select HDMI by pressing the AV key on your remote control.
NOTE:In HDMI mode; some resolutions are supported when a DVI to HDMI converter cable
from a PC is used. Only 16:9 and 4:3 are supported as picture format.
High Definition - HD-READY
Your television can receive high-definition signals (HDTV). You can connect the
input sources (HDTV set-top box or HDTV DVD player) to the (HDMI) socket
(digital HDTV signal). This ensures that you can view digital HDTV programs, even
if they are copy-protected (HDCP High-Definition Copy Protection).