Filter
Top Products
12
6.3.2-Manual tuning of digital
channels and storing in the memory
Press the MENU button on your
remote control. Select CHANNEL
SETUP by pressing the Right/Left
movement button and confirm your
selection with OK button. Select
Digital Manual Tuning tab by
pressing the Up/Down movement
buttons and press Right movement
button or OK button to confirm.
Digital Manual Tuning menu will be
displayed.
Digital Manual Tuning
VHF CH 9
Frequency
205 MHz
Poor Normal Good
Select
Back
Exit
Channel will appear in the list and be stored
in the memory when it is found. Press MENU
button to return to the previous menu from
the manual search menu or press EXIT
button to exit the menu.
6.4-Performing Analogue
channel settings
6.4.1-Automatic tuning of analogue
channels and storing in the memory
Press the MENU button on your
remote control. Select CHANNEL
SETUP by pressing the Right/Left
movement button and confirm your
selection with OK button. Select
Auto Tuning tab by pressing the
Up/Down movement buttons and
press Right movement button or OK
button to confirm. Country Selection
menu will be displayed.
CHANNEL SETUP
Please select country and scan type, then press OK to start tuning
Country Selection
England
Scan Type
ATV
Time Zone
London GMT
Select
Back
Exit
ADDITIONAL INFORMATION
Please note that Encrypted channels may
not be stored after scanning in the Digital TV
channels. If this is the case then you will need
to rescan the channels again but this time
change the LIST SCRAMBLED CHANNELS
from AUTO to ON:
1 Press Menu.
2 Select Features.
3 Select Digital Features.
4 Select User Interface Options.
5 List Scrambled Channels will show.
Change “Auto” setting to “ON”
6 Press Exit button to exit the Menu.
You will need to rescan the digital TV
channels:
1 Press Menu.
2 Select Setup.
3 Select Auto Tuning and press the OK
button to start the channel scan and this
time store the Scrambled channels.
Enter the channel number from the Manual
search menu using the numeric keys if you
know the channel number; if you don’t
know the channel number, you can perform
search by using right/left direction buttons.
Scroll to the Country Selection
tab by pressing the Up/Down
movement buttons and press Right/
Left movement buttons to select
your country. Then, scroll to the Scan
Type tab by pressing the Down
movement button and select ATV option by
pressing the Right/Left movement buttons.
Press OK button to confirm your selections.
Analogue channels are searched and stored
automatically. At the same moment, the
progress of auto tuning and the channels
stored in the memory are displayed in the
menu. Program Table menu is displayed at
the end of the Auto Tuning.