Filter
Top Products
18
7.1.6-Headphone
By connecting headphones to your television
you can listen to the program sounds
independently from your television. To turn up
and down the headphone volume level, select
Headphone tab from the Sound menu and
adjust the volume level by using the Right/Left
movement buttons.
Note 1: The settings you have made in the
Sound menu will be stored in the memory
without requiring any other operations.
Note 2: When you want to hear the sound
from the headphone only, just press the
MUTE button on your remote control.
7.2-Performing the Picture
settings
7.2.1-Picture Menu
You can perform Picture settings by entering
the Picture menu. To do this, press the
MENU button on your remote control, select
PICTURE menu by pressing the Right/
Left movement buttons and press the OK
button. In this menu, you can select one of
the titles for which you would like to perform
an operation.
the Advanced Picture Settings menu. The
changes you have made in the PICTURE
menu will be stored in the memory without
requiring any other operation.
7.2.2-Picture Mode
You can select either one of the
four non-adjustable settings in the
memory or one of the user options
by pressing the (
) button on your
remote control. Vivid, Natural, Cinema and
Sports are default values; USER represents
the values you stored in memory.
7.2.3-Colour Temperature
Colour intensity of the picture can be
adjusted with this feature. Select Colour
Temperature tab from the picture menu by
pressing the Up/Down buttons to activate
this feature and then select one of the Cool,
Normal or Warm options by pressing the
Right/Left buttons.
7.2.4-Tint
When NTSC video is input via Scart, you may
make Hue settings. The tint option is not seen
in the menu when you have not input this type
of a video. When a NTSC video is connected
via the Scart, this option becomes active and
it is available in the menu.
7.2.5-Advanced Picture Features
You can adjust advanced picture features
of your television from the Advanced Picture
Settings menu under Picture menu.
PICTURE
Picture Mode User
Brightness
Contrast
Colour
Sharpness
Colour Temperature Warm
Select
Back
Exit
PICTURE
DNR
High
MPEG NR
High
Vibrant Colour High
Perfect Clear
High
Dynamic Contrast
High
Dynamic Backlight Off
Backlight
Select
Back
Exit
You can select the desired setting by
pressing the Up/Down movement buttons
and adjust their levels with Right/Left
movement buttons. You can adjust Picture
Mode, Brightness, Contrast, Colour,
Sharpness and Colour Temperature levels
as you desire. You can adjust the DNR,
MPEG NR, Vibrant Colour, Perfect Clear,
Dynamic Contrast, Dynamic Backlight
and Backlight options as you desire from