Filter
Top Products
In the box
Inside this package you should have:
Television,Remote control,User guide, AAA batteries x 2
Read these instructions before use.
6
CONNECTION/PREPARATION
Inserting batteries into the remote control
Open the battery compartment by removing the lid.
Insert the batteries (Mignon type, for example UM-3 or AAA, 2x1,5V).
Observe the polarity (marked on the base of the battery compartment).
Close the battery compartment.
Note:
If the television no longer reacts properly to
remote control commands, the batteries may
be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage
resulting from used batteries.
Plug the cable of the outdoor or indoor aerial
(passive or active indoor aerial with its own power
supply) into the aerial socket »
« of the television set.
Please note:
When connecting an indoor aerial, you may have
to try it out at different positions until you get the best
reception.
Connect the TV mains plug into your domestic mains socket
outlet. (230V 50Hz A.C.)
Please note:
Only plug the TV into the mains socket after you have
connected the external equipment and the aerial.
Environmental note
Batteries, including those which contain no heavy metal, may not be disposed of with
household waste. Please dispose of used batteries in an environmentally sound manner.
Find out about the legal regulations which apply in your area.
Connecting the aerial and the mains cable
+
-
-
+