Filter
Top Products
16
6.6.8-Channel List
If you press OK button when no menu is
open, Channel List menu will be displayed
on the screen.
CHANNEL LİST
Channel 1
Channel 2
Channel 3
Channel 4
Select
Exit
You can see all the channels of the current
mode while you are in the Channel List
menu, you can select the desired channel
with Up/Down buttons and view it by
pressing the OK button.
6.7-Signal Information
This menu gives information about Channel,
Network, Modulation, Signal level and quality.
Press MENU button to enter this menu.
Select Channel Setup menu by pressing
the Right/Left movement buttons. Select
Signal Information tab by pressing the
Down movement button and confirm with
Right movement button or OK button. Signal
Information menu will be displayed.
Note: Signal Information menu will be active
only for Digital broadcasts.
6.8-CA Module (Conditional
Access)
In this menu, you can check the CA Module
settings. If a CI module is inserted for a
channel that has a scrambled broadcast, then
a submenu for that module is opened and the
information for that module is updated.
6.9-Active Antenna Power
When this feature is set to On, you can
connect an external antenna to your television
without needing any external power source.
Scroll to the Active Antenna Power tab
by pressing the down movement button in
the Channel Setup menu and select On by
pressing the Right/Left movement buttons.
Signal Information
Channel 23 490 Mhz
Exit
Network XX Network
Modulation 2X 64XXX X2/3
Quality 60%
Signal Strength 90%