Filter
Top Products
23
to block from the Block Programme menu
with Up/Down buttons and confirm with the
GREEN button on your remote control. A
lock symbol will appear next to the channel
name. When a blocked channel is selected,
the password screen will be displayed and
the channel will not appear until the correct
password is entered. If you do not enter the
password, CH BLOCKED will be displayed
on the screen. There will also be a lock
symbol next to the blocked channel in the
Program Table. Repeat the same steps to
remove the blocking.
7.5.4-Parental Guidance
If it is supported by the broadcaster,
this feature allows you to enter an age
restriction between 4 and 18 for the
programs broadcasted. If the program to be
broadcasted is over the age restriction you
entered, the channel will not be displayed and
a password screen will appear. To view the
program, correct password must be entered.
Enter an age limit between 8 and 18 from the
Parental Guidance tab in order to activate this
feature.
7.5.5-PanelLock
If this feature is turned On, the control buttons
on your LCD Television will be locked and
will not function. When it is set to off, control
buttons will become active.
7.6-Other picture features
7.6.1-Zoom
Press the ZOOM button on your
remote control while watching a
channel to activate this feature. The
image is zoomed in 3 stages oriented
to the centre.
Note:Zoom feature is aborted when the
channel is changed.
7.6.2-Freeze (Freeze picture)
You may freeze the program picture
you are watching with this feature.
For this, press the Timeshift button
on your remote control. The program
picture will freeze until the same button is
pressed a second time. Freeze: On, Freeze:
Off OSD will appear each time you press the
Timeshift button.
7.6.3-Picture and Teletext (PAT)
(optional)
With this feature, you can follow the
teletext broadcasts simultaneously
with the current program, provided
that the current program contains
teletext broadcast. For this purpose,
when you press TXT and then 16:9 buttons
in a channel with teletext broadcasting, the
screen will be split into two with the left pane
showing the currently watched program and
the right pane will show the Teletext at the
same time. In the event that you wish to exit
the PAT mode for any reason, simply press
the TXT button.