Filter
Top Products
11
COUNTRY SELECTION
BELGIUM
CZECH REP
DANMARK
DEUTSCHLAND
ELLADA
ESPANA
FRANCE
HUNGARY
IRELANDA
ITALIA
NETHERLANDS
NORGE
ÖSTERREICH
POLSKA
SCHWEIZ
SUOMI
SVERIGE
TÜRKİYE
U.K.
..........................
START AUTOPROGRAMMING
6.2-Turning on the TV and
Setting the Channels
When you turn on your television for the
first time, FIRST TIME INSTALLATION
CHECK AERIAL CABLE IS CONNECTED.
PRESS OK KEY TO CONTINUE message
is displayed. If the aerial connections are
correct, press OK button to continue.
COUNTRY SELECTION menu will be
displayed. Select the country by using
Up/Down, Left/Right movement buttons
and press OK button to start the auto
programming. Channel Search menu
will be displayed and digital channels are
scanned and stored in the memory.
After completion of the searching process
Channel Search Results menu will
be displayed. Number of TV and Radio
channels already detected and stored in the
memory at the end of the search process will
be displayed in this menu. Finish the Digital
channel searching process by pressing the
OK button.
PRESS OK KEY TO START ANALOGUE
SEARCH PRESS MENU KEY TO EXIT
message will be displayed. You can make
Analogue channel tuning with OK button
or finish the searching process by pressing
the MENU button.
6.3-Performing Digital Tuning
You can either tune the Digital programs
automatically or manually and store them in
your television.
6.3.1-Automatic Tuning of Channels
and Storing in the Memory
Press AV button on your remote
control, select DIGITAL TV tab
from the SOURCE menu by using
Up/Down movement buttons
and confirm by pressing the OK
button. Your TV will switch to Digital
mode. Press MENU button, MAIN
MENU will be displayed. Select SETUP tab
with Down movement button and confirm
with the OK button. SETUP menu will be
displayed.
Select AUTO TUNING tab and
confirm by pressing the OK button.
COUNTRY SELECTION menu will
be displayed.
MENU
SETUP
AUTO TUNING
MANUAL TUNING
FIRST TIME INSTALLATION
SELECT
BACK
Select the country by using Up/
Down, Left/Rightmovement
buttons and press OK button
to start the auto programming.
Channel Search menu will be
displayed and digital channels are
scanned and stored in the memory.
Channel Search
Waiting for signal...
Service found:
TV: 0
Radio: 0 Other: 0
Stop Search
Note: You can also assess Auto Tuning
menu from the Service Menu submenu
under Digital Features menu.