Filter
Top Products
14
6.3.5-Digital Features
To enter digital features menu, select
FEATURES tab from the main menu
by using Up/Down movement buttons.
Select DIGITAL FEATURES tab from
FEATURES menu by using Up/Down
movement buttons and press OK button to
confirm. DIGITAL FEATURES menu will be
displayed.
You can select the menu headings with Up/
Down movement buttons to make settings.
6.3.5.1-Language Settings
You can select subtitle and sound language
provided that the broadcast is supported for
all digital broadcasting channels. Unless you
make a selection, the language supported
by the broadcaster will be selected
automatically.
To perform language selection,
select Subtitling Language 1,
Subtitling Language 2, Audio
Language 1, Audio Language 2
tab from the Language Settings
menu by using Up/Down
movement buttons and make your
language selection with Left/Right
movement buttons. You can also
select subtitles directly by SUBT
button on your remote control or
make sound selection by AUDIO
button.
6.3.5.2-Access Control
With this feature you can lock channels that
are not appropriate for children and set age
restriction for programs being broadcasted.
Digital Features
Language Settings
Access Control
User Interface Options
Timers
Favourite List
No Common Interface Module Present
System Menu
Select
Back
Lock/Unlock Channels: Select Lock/
Unlock Channels tabs from Access
Control menu and press OK button
to confirm. All TV Channels list will be
displayed; select the channel you want to
lock with Up/Down movement buttons and
press OK button to confirm. x mark will be
displayed at the beginning of the channel
name which is to be locked. To unlock,
repeat the same steps. Select the channel
which is locked and enter the correct
password into the displayed password
screen. The channel will not be displayed
unless the correct password is entered.
Note1: To re-prevent access after entering
the correct password and displaying the
locked channel, your television has to be
switched to Standby mode and turned on
again.
Note2: The password for both of these
features has been set as 0000 at the factory.
You can change the password as you wish
under Change PIN item in the Access
Control menu.
6.3.5.3-User Interface Options
From this menu, you can decide whether
to display the scrambled channels in the
program table or not. If this option is set
to ON, all channels will be displayed. If it
is set to OFF, scrambled channels will not
be displayed. If it is set to AUTO and a CI
card is installed to your television, then
the scrambled channels supported by the
card will be displayed.
6.3.5.4-Timers
In this menu you can view Reminders you
had entered from the EPG or change the
entered Reminders.
Access Control
Lock/Unlock Channels
Change PIN
Select
Back