Filter
Top Products
• Setup Menu
Setup Menu is explained on the page 8
TV set up
The TV set up is accessed through a menu
system.
Once you have stored your set up, this
is the set up the TV will default to when
you switch it on.
Please note
If you do not press any buttons for 20
seconds the TV will exit the menu system.
There are three menus;
• Picture Menu
• Setup Menu
• Features Menu
• Features Menu
To reach the feature menu press MENU
button 3 times.
a) Sleep Timer
The sleep timer automatically switches
the set to stand-by after the preset time
has elapsed.
You can select the time from 15 to 120
minutes with 15 minutes steps.
To change, for example, the
colour, select it using Program
down buttons.
Use the Volume up and Volume
down buttons to change the
setting.
To save your settings, select
STORE and press the OK button.
STORED will be displayed.
The picture menu allows you to set up
the following:
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
Note:
If you play NTSC formatted tape via
the scart, the TINT menu will appear to
adjust the TINT level.
• Picture Menu
To reach the picture menu press MENU
button.
The Volume level will also be stored (even
thouch Volume is not shown in the menu).
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
STORE
PICTURE
NEXT MENU
There are two ways to set the sleep timer;
1- Select the SLEEP TIMER in the
FEATURES menu. Select the desired time
by using Volume down or Volume up
buttons.
2- You can also use the YELLOW ( )
button on your remote control to select
this function. You can increase the switch
off time interval by pressing this button
repeatedly.
Notes:
The last 60 seconds of the desired switch
off time by counting from 59 down. When
this time interval has elapsed the set will
switch to STAND-BY.
To view the remaining sleep time, press
YELLOW ( ) button. To cancel the sleep
time select OFF in SLEEP TIMER.
b) On Timer (Model dependant)
Select the on time between 30 minutes to
12 hours by pressing the Volume up
button press the numeric buttons or AV to
select the program to come on. Switch
the TV to stand-by to active on timer.
Note: You cannot select Off timer and On
timer together.
If TV is at Stand-by position, you can
switch it on at desired time and programme
by activating the ON TIMER feature.
To cancel the on time select off in ON
TIMER.
SLEEP TIMER
ON TIMER
AVL
LANGUAGE
FEATURES
EXIT
OFF
OFF
ON
11