Filter
Top Products
Tuning the television
There are two ways of tuning your
television:
• Manual, where you control the tuning
process or Autoprogram where the
television does it all automatically.
• TV sets equipped with ATS (Automatic
Tuning System) sorts the channels.
Please Note
If the TV is set to a channel with no signal
the TV will return to standby after 5
minutes. The time remaining is displayed
on the screen. For the last 60 seconds.
Manual Tuning
Tuning the TV is accessed through the
SETUP menu.
To access the SETUP menu:
Press the MENU button twice. SETUP
Menu will appear.
Press the AV/TV button to select
your input as follows:
1 AV1 when using SCART socket 1.
2 AV1 S-VHS for S-Video equipment to
scart 1 (S-VHS / Scart adapter is needed).
3 AV2 when using the PHONO sockets
of the TV. (Optional)
Press the AV/TV button again to
return to TV.
In the SETUP Menu select
PROGRAM NO and change to P1
using
the Program down button to
select it and the Volume up or
Volume down button to change it.
Starting with Program P1, tune in
the first channel as follows:
Use the Program up button to
select SEARCH.
Press the Volume up or Volume
down button to start the tuning
search.
The search arrow will appear.
Use the Program down
button
to
select PROGRAM NO.
Use the
Volume up/down
buttons
to select the program
number.
Use the Program down button to
select STORE. Press the OK
button and STORED will appear
on the STORE line.
You have now stored the first
channel.
Use the Program up button to
select again SEARCH and
continue the tuning procedure
until you have tuned in all the
programmes you want or the
television can receive.
When the search finds a channel signal it
will stop.
Identify which channel you are
watching
(BBC 1, ITV 1 etc.) and
decide which
program number you
want it to be.
Or press
Volume up
again to carry on
searching.
b) If you know the channel number.
(Tuning with channel numbers) See
page 18
Enter the SETUP menu by pressing MENU
button twice.
Press the OK button to select “S”
for cable channels and “C” for
terrestrial broadcast.
Use Volume up/down button to
select the channel number or enter
the channel number using the
Numeric buttons.
Use the Program down button
to select PROGRAM NO.
a) If you don’t know the channel
number (Tuning with SEARCH
function).
CHANNEL
SYSTEM
FINE TUNE
SEARCH
AUTOPROGRAM
CHILD LOCK
PROGRAM NO
STORE
SETUP
NEXT MENU
C 26
I
0
OFF
P6
0 9
C/S
Enter the SETUP Menu by pressing the
MENU button twice.
8