Filter
Top Products
Via aerial socket (Only for Video Recorder)
Make sure the TV and video recorder are both switched off.
Unplug the aerial lead form the TV and plug it into the aerial socket on the video
recorder (if fitted).
Plug a coaxial plug into the RF out socket on the rear of the video recorder and plug
the other end into the aerial socket of the TV.
Switch on the video recorder and the TV.
If your video recorder has a test signal, switch it on. (Refer to the video recorder user
guide). Or play a pre recorded tape.
See ‘Tuning the TV’ and carry out the tuning procedure for the video recorder test
signal. Select programme number 0 or between 55 and 99.
Connecting TV with camcorder
VIDEO
VIDEO
AUDIO
Audio In
Video In
21 pin SCART
connector
to 21 pin SCART
input on TV
VIDEO
AUDIO
VIDEO RECORDER
or
DVD PLAYER or DECODER
Connecting TV games and computer
AV1
Camcorder
AV1
AUDIO
Connecting TV with video and satellite/digital receiver
15
Audio In
Video In
Audio In
Video In