Filter
Top Products
Playing Discs
05
35
En
Scanning discs
You can fast-scan discs forward or backward
at various different speeds using the remote.
1 During playback, press 1 or ¡ to
start scanning.
2 Press repeatedly to increase the
scanning speed.
• MP3s can only be scanned at one speed.
• The scanning speed is shown on-screen.
3 To resume normal playback, press 3
(play).
• Sound can be heard while scanning
SACDs, audio CDs, and MP3 discs.
• There is no sound while scanning DVD-
Videos and Video CDs, and no subtitles
while scanning DVD-Video.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached on a DVD-Video disc.
Using the Multi Dial
You can use the Multi Dial to control fast and
slow motion scanning and frame advance of
DVD-Video, DVD-R/RW and Video CDs.
When scanning, no audio is output, even
when the scanning speed is 1/1 (normal
playback speed).
To start scanning playback at 1/16 speed,
turn the MULTI DIAL (clockwise for
forward; anticlockwise for reverse)
during playback.
• Turn the MULTI DIAL in the same
direction to increase the scan speed—
the speed is indicated at the top left of
the screen.
• Turn in the opposite direction to slow the
scan speed/reverse direction.
To start high-speed scanning, turn the
MULTI DIAL quickly (clockwise for
forward; anticlockwise for reverse)
during playback.
• Change the speed/direction in the same
way as above.
• To resume normal playback, press 3.
To start manual scanning, press JOG (JOG
MODE), then use the MULTI DIAL to
advance frames in either direction.
To switch off jog mode, press JOG (JOG
MODE) again. The picture remains
paused until you restart playback.
• To resume normal playback, press 3.
• You can scan Video CDs in the same
way as DVD-Video discs (see above).
However, reverse slow-motion scanning
is not possible, and there are just two
fast scanning speeds.
1
7
24