Filter
Top Products
The Video Settings Menu
07
51
En
1 Select one of the Memory presets (see
above).
2 Move the joystick down to select
‘Detailed Settings’ then press ENTER.
I.Memory1
Detailed Settings
Video Adjust
3 Adjust the picture quality settings.
Recall Settings
Fine Focus
Contrast
Sharpness
Chroma Level
Hue
I.Memory1
On
Interlace Memory 1 (I. Memory 1)
min max
soft fine
min
max
green
red
• Use the joystick (up/down) to select a
setting.
• Use the joystick (left/right) to adjust the
current setting.
• Press DISPLAY to switch between full
and single view.
• You can change the preset number from
the Recall Settings menu item.
You can adjust any or all of the following
picture quality settings:
• Fine Focus – Switch On to reveal
greater detail (high resolution) in the
picture.
• Contrast – Adjusts the contrast
between light and dark elements in the
picture.
• Sharpness – Adjusts the sharpness of
the mid-frequency (less detailed)
elements in the picture. (This setting is
only effective when Fine Focus is On.)
• Chroma Level – Adjusts how saturated
colours appear.
• Hue – Adjusts the overall colour
balance between red and green. (This is
Video Adjust - Interlace Only
• Default setting: Standard
From the Video Adjust screen you can select
the standard video presentation or define
presets of your own.
1 Press SETUP and select ‘Video Adjust’
from the on-screen display.
You can also access these settings by
pressing V.ADJ (VIDEO ADJUST).
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
Video Adjust
2 Use the joystick (left/right) to select a
preset.
Standard
Video Adjust
• Standard – Normal
• I. Memory1–2 Use for making your own
interlaced presets (see below)
3 Press ENTER to make the setting and
exit the Video Adjust screen.
• Depending on the disc and the TV/
monitor, you may not see the effect
clearly.
Creating your own interlace
output presets
1
7
39
composite video outputs.