Filter
Top Products
4-Port XGA Video Splitter
6
1. Introduction
1.1 General
The Model AC090A is a 1 in x 4 out XGA Video Splitter / Distribution
Amplifier with field-programmable cable length compensation on 2
outputs for driving long video cables.
The unit accepts a VGA input signal from a computer and provides 2
standard outputs and 2 boosted outputs. The standard outputs are labeled
"STD" and are capable of driving cables up to approximately 150 feet.
The boosted outputs are labeled "DX" and can be programmed using dip-
switches to drive any length of cable up to 600 feet.
The Model AC090A fully terminates the input video signal and
amplifies it using high bandwidth buffers to ensure a clear and crisp
image at each output. The unit accommodates a maximum resolution of
1600 x 1200 pixels at refresh rates to 100 Hz.
It is recommended that when video extension cables are required, only
high quality multi-coaxial VGA or RGBHV (such as Black Box
EVNPS05-0050-MF) be used.
The Model AC090A is housed in a compact shielded enclosure and
includes a small power adapter and a 6 ft video cable for connection to
the PC’s VGA output.
1.2 Features
• Low cost, high reliability
• Packaged in a portable EMI shielded enclosure
• Field-programmable compensation for driving long cables
• Resolutions up to 1600 x 1200
• HD15 connectors for input and outputs
• Perfect for presentations or remote monitoring