Filter
Top Products
4-Port XGA Video Splitter
8
2. Connect the AC adapter to the PWR jack on the splitter and plug it
in the AC source. Connect up to 4 monitors to the outputs of the
splitter. If any of the monitors are to be located further than 150
feet, plug them in to the DX ports of the splitter (see figure 2.2).
3. The Model AC090A has a special compensation to drive long
video cables that can be applied to outputs 1 & 2. Use the
following table to set the dip-switch for these outputs (see figure
2.3).
Dip Switch Setting Range of Cable on Outs 1 & 2
~~
0 to 100 feet
€~
100 to 250 feet
~€
250 to 400 feet
€€
400 to 600 feet
NOTE
The compensation setting affects both DX outputs equally
Figure 2.3