Divar 700 Series Advanced configuration | en 73
Bosch Security Systems Installation and Operation manual F.01U.246.471 | v3.6 | 2011.11
panel. This causes the bitrate for the camera to be lower than the value set in the
recording profiles.
– No Bitstream when the camera can not stream video data due to bitrate limitations.
If the total required bandwidth is greater than the total availble bandwidth, the unit puts
cameras into the No Bitstream state, starting with the highest numbered IP camera.
The total required bandwidth of all cameras based on the ceiling values and the total
bandwidth available in the unit is shown.
Note:
Refer to the data sheet for a list of supported IP cameras and encoders.