Filter
Top Products
88 en | Advanced configuration Divar 700 Series
F.01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems
6.8.5 Video loss
The event behavior for video loss signals can be configured for each video channel in turn.
– Check the Enabled box for each video channel if video loss should activate an event.
6.8.6 Copy
The copy event settings function makes it easy to set up a large number of events for all
profiles and all cameras. The copy function copies content from within a single profile to other
profiles. The camera inputs and the action types within each of these profiles can be selected.
To copy event settings:
1. Check the Copy multiple cameras box to copy several camera inputs within the From
profile.
2. Select the profile number to copy from.
3. Highlight the profiles to copy to (highlight the un-numbered box to select all).
4. Select the camera input(s) to be copied from, for the profile to be copied.
5. Select the camera inputs to be copied to (hightlight the un-numbered box to select all).
6. Check only those actions (General, Contact, Motion or Video loss) to be copied.
7. Click Copy.