Filter
Top Products
Digital Video Recorder Connections and settings | en 23
Bosch Security Systems User Manual F01U | 2.0 | 2008.12
Alarm_in_11 11 Alarm input 11
Alarm_in_12 12 Alarm input 12
Alarm_in_13 13 Alarm input 13
Alarm_in_14 14 Alarm input 14
Alarm_in_15 15 Alarm input 15
Alarm_in_16 16 Alarm input 16
Relay1_A 17 Relay 1 output pole 1
Relay2_A 18 Relay 2 output pole 1
Relay3_A 19 Relay 3 output pole 1
Relay4_A 20 Relay 4 output pole 1
Relay5_A 21 Relay 5 output pole 1
Relay6_A 22 Relay 6 output pole 1
Relay7_A 23 Relay 7 output pole 1
Relay8_A 24 Relay 8 output pole 1
System Ground 25 Chassis Ground
Table 3.3 Alarm I/O pin confi guration
3.11 System operation
Default monitor setting is VGA.
1. Turn on the unit. System booting will commence. The BOSCH logo image will be displayed on
the main monitor during the system booting.
2. When booting is complete, the login window will be displayed.
Select a user ID by using the mouse or arrow, then the ENTER button on the remote control or
front panel.
Figure 3.5 Login window
- ADMINISTRATOR: Unlimited operation of the unit.
- Advanced User: Use of the limited functions of the system (the setup confi guration is not
allowed to change).
- Normal User: Use of the limited functions of the system (multiscreen monitor and live
image view are available).
3. Enter the password by using the virtual keyboard. (Initial password is “000000”.)
4. Press LOCK or click the OK (LOCK) icon.
You can see the live screen and operate the system.