Filter
Top Products
Secure the controller-drive tray
!
Warning!
Risk of bodily injury
Do not use equipment in the cabinet as a shelf or work space.
1. Secure the screws in the top mounting holes and the bottom mounting holes on each
side of the controller-drive tray.
2
1
1
2
Figure 5.1: Controller-Drive Tray (12 Drives)
1
Mounting Holes 2 Screws
2. Secure the rear of the controller-drive tray to the cabinet by using two screws to attach
the flanges on each side at the rear of the controller-drive tray to the mounting rails.
3. Install the front end caps on the front of the controller-drive tray by pressing the front
end caps into place on the left side and the right side.
Note:
You will install the DE1600 drive trays below and above the controller-drive tray, keeping
the weight in the lower portion of the cabinet. You can install a maximum of 192 drives,
including the 12 drives in the E2600 controller-drive tray. If needed, refer to E2600
Controller-Drive Tray Installation manual.
5
E2600 DSA E-Series iSCSI Disk Arrays Secure the controller-drive tray | en 9
Bosch Sicherheitssysteme GmbH Quick Install Guide 07/2012 | V1 |