Filter
Top Products
37
Controlling Other Audio Devices
English
To set up the remote to control your cable/satellite box
1. Turn on both the 3•2•1 system and your cable/satellite box.
2. Press and hold CBL-SAT until the remote LED is lit (about five seconds).
3. Alternately press Channel and CBL-SAT On-Off until your cable/satellite box
turns off.
4. Press Enter. Check that the remote LED turns off.
5. Point the remote at your cable/satellite box and press CBL-SAT On-Off. If your cable/
satellite box does not respond, go back to step 2 and try again.
To set up the remote to control your VCR or PVR (for example, TiVo or Replay TV)
1. Turn on both the 3•2•1 system and your VCR/PVR.
2. Press and hold AUX until the remote LED is lit (about five seconds).
3. Alternately press Channel and AUX On-Off until your VCR/PVR turns off.
4. Press Enter. Check that the remote LED turns off.
5. Point the remote at your VCR/PVR and press AUX On-Off. If your VCR/PVR does not
respond, go back to step 2 and try again.
AUXAUX
AUXAUX
AUXAUX