Filter
Top Products
22
CONTROLLING EXTERNAL SOURCES
C
ONTROLLING EXTERNAL SOURCES
EnglishFrançais Español
8. Notice the
TV Power Status:
•
TV Detected means the installed TV sensor is working.
•
TV Not Detected means the TV sensor (if installed) is not positioned properly, or a
SCART connector is installed.
• Press
System
or
Exit
to leave the System menu.
Note:
For information on positioning and using the TV sensor, refer to “Installing the TV on/off
detector” in your Installation Guide.
For cable/satellite control
While you can set the LIFESTYLE
®
remote to control both cable and satellite boxes, you must
designate one or the other, not both, in the steps below.
The device that is connected to the CBL-SAT input on your media center is the one you
should designate. So when you press the
CBL-SAT
source button and the
On/Off
button below it,
you are operating that device.
For the second device, use the AUX option to designate the device brand and code. Do so,
however, only if one or the other of the following is true:
• The device you identify is connected to the media center AUX for Audio In jacks.
• The device you identify is connected to the TV and no device is connected to the media
center AUX for Audio In jacks.
Note: For general guidelines on using the LIFESTYLE
®
System menu, refer to “Using System
Menus” on page 25
.
Follow the cable or satellite process below:
Turn on the cable or satellite box, whichever you are setting the remote to control. Turn on
the TV and be sure to select the Video input on the TV for the media center. Then, using the
LIFESTYLE
®
remote control, press
CBL-SAT
and follow the steps below:
1. Identify the device:
•From the
Remote Control
options in the System menu, select CBL/SAT Device.
• Move right and
s
elect either Cable or Satellite by pressing
Enter
.
2. Identify the brand:
• In the menu options on the left, select
CBL/SAT Brand.
• Move to the right and up or down in the alphabetical list to locate your brand.
• Press
Enter
to select the brand.
3. Choose the device code:
• From the menu options on the left, select
CBL/SAT Device Code.
• Move right to select the first code.
• Press the
CBL/SAT On/Off
button on your LIFESTYLE
®
remote. Press the button again.
If the cable or satellite box turns off and on, you have chosen the right code.
If not, select another code, and press the
CBL/SAT On/Off
button two more times.
• When you have chosen the right code, press
Enter
.
• Press
System
or
Exit
to leave the System menu.