Filter
Top Products
39
REFERENCE
R
EFERENCE
English FrançaisEspañol
Using the media center:
1. Lift the media center door and press the All Off button.
2. Press and hold the Store button. Your current house code will appear in the media center
display window in the form of four rectangles, which represent the positions of switches
1 through 4:
HOUSE CODE:
Switches 1 - 4 down = 0 0 0 0 (current house code)
3. While holding the Store button, press any button on the remote control.
The media center displays the new house code, which confirms its recognition of the
new code:
NEW HOUSE CODE:
(Switch 1 up, 2 down, 3 up, and 4 down = 1 0 1 0 (new house code)
4. Release the Store button. The system remains off.
5. If you have additional remote controls, change the switches to match those of the first
remote control by following steps 1-3 above. You do not need to repeat steps 4-5.
Note:
To verify your system’s house code, press Store while the system is off. The display con-
firms the settings of switches 1-4.
Figure 19
Miniature switches on the
Primary remote are set for
use in the Main room (A)
123456789
123456789
Switches (1-4)
As set at the factory:
all switches down.
Switches 1-4 need to match those
switch settings in your main remote.
Set switches 5-9 for the room where
you will use the Bose
®
link remote.
Switch 5 determines which “audio
stream” (of two) you hear.
For more information on streams,
refer to “Setting up a second room
with sound” on page 40.
Switches 6-9 represent the room
where the remote will be used.
In the main room, the primary
remote is set as Room A with all
switches down.
Other switches
For a Bose
®
link remote
in another room