Filter
Top Products
First Time Installation
Set Top Box Menu Set Up
5
Once you have connected your Set Top Box to your TV correctly and the Mains Power
is connected and switched on, you can now turn on your TV. Press the Power Button
on your remote to turn on your Set Top Box. If you are using the receiver for the first
time or have conducted a Factory Reset, the on-screen Installation Guide will
be displayed and will assist you in setting up your Set Top Box.
When the on-screen Installation Guide begins you will be asked to confirm the
following settings:
(1) Confirm the OSD(On Screen Display) language. Use the navigation buttons to
select your desired language.
(2) Confirm your country of residence. Use the navigation buttons to select your
desired country.
(3) You will then select Channel Search, this will begin the Automatic Channel
Search that will source and store all the available channels. Press the Right
Arrow Button or the OK Button to select and begin the Automatic Channel Search.
Once the Automatic Channel Search has been completed all channels will appear in the
Channel List and you will be able to begin watching your favourite channels.
Basic Operation
Managing your Program Settings
To access the Program Menu, press the Setup Button to enter the Main Menu and then
select the Program option. The Program Menu provides you with options to adjust the
Program Settings. Select an option as shown below and press OK or Right to adjust the
setting. Press the Exit Button to exit the Menu.