Filter
Top Products
Press the Setup button on the remote to enter the 540D V2 Setup
menus:
Running along the top of the screen are four icons that represent the
four main menu sections:
Video Setup
Audio Setup
Dolby Digital Setup
Preference Setup*
*
Note:
To
enter
the
Preferences
menu
the
unit
must
first
be
in
stop
mode
with
the
disc
drawer
out.
Press Setup to enter the menu system. Use the Navigation arrows
() on the remote to highlight the icon at the top of the screen
for the main menu you want to select and then either press Enter or
to go into that menu and select its first sub-menu. You can now navigate
to each sub-menu item you might want to change using and then
to select settings.
The yellow highlight always shows the menu or setting you have
navigated to, the orange/brown highlight shows the current setting that
is being used. Pressing Enter stores a highlighted setting as the new one
to use. To navigate back out of a sub-menu press to move to the sub
menu list if necessary and again to move to the top main menu list.
You can now use to select a new main menu.
Note:
Some setup is inter-related with other setup items, and if enabling
a function automatically disables another, the disabled function will
appear grey and cannot be set.
All setup is saved on exiting the menus and is saved even if the unit is
powered off.
540D V2azur
11
ENGLISH
DVD player setup
With the Video Setup menu selected, use the and arrows to move
up/down to the desired sub-menu. Use the Navigation arrows
() to adjust the settings and press the Enter button to confirm
your selection. See the following list for the Video Setup menu structure:
TV Display
Use to select the screen format to fit your TV screen.
4:3
PanScan
-
You can select this screen
when connected to a normal TV set. The
widescreen picture will display on the full
screen, but some parts of the video
picture will be cut off automatically.
4:3
LettBox
-
Alternatively you can select
this screen when connected to a normal
TV set. The full widescreen picture is
displayed on the screen with black strips
on the top and bottom of the screen.
Menus
Settings
TV Display 4:3 PanScan
4:3 LettBox
16:9 Wide
TV Type PAL
AUTO
NTSC
SCART/Component Component-p
Component-i
Scart RGB
HDMI output On
Off
HDMI resolution 480p (60Hz)
576p (50Hz)
720p (50Hz)
1080i (50Hz)
720p (60Hz)
1080i (60Hz)
Angle mark On
Off
OSD Lang English
Español
Deutsch
Français
Italiano
Nederlands
Русский
Screen Saver On
Off
Setup
Video Setup menu
Go To Video Setup Menu
-- Video Setup Menu --
TV Display PS
TV Type PAL
Scart / Component Comp
HDMI Output On
HDMI Resolution
Angle Mark On
OSD Lang ENG
Screen Saver On