Filter
Top Products
16
Basic operating instructions
Note:
The repeat chapter/title setting will be cleared when moving to
other chapter or title.
A-B Repeat
1. Press the A-B button at your desired starting point. ‘A’ appears briefly
on the TV screen.
2. Press the A-B button at your desired end point. ‘A-B’ appears briefly
on the TV screen, and the repeat sequence begins.
3. To exit the sequence, press the A-B button.
Note:
• The A-B repeat section can only be set within the current title (for DVD
video) or current track (for DVD audio, Video CD and Audio CD).
• A-B repeat playback is not available with some scenes on DVD.
• A-B repeat playback does not function during title, chapter, track or all
repeat playback.
During DVD playback it is also possible to access soundtracks, subtitles
and angles (where present on the disc) without having to go back to the
Title Menu or stopping playback. Use the following remote control
buttons:
Audio
Press to directly access alternate audio soundtracks on the DVD (if
available on the DVD disc).
Sub
Press to enable/disable Subtitles (if available on the DVD disc).
Angle
Press to access various camera angles (if available on the DVD disc).
Zoom
Press to cycle through the various zoom magnifications (and back to
normal display).
DivX/MP4 playback
If a disc (CD or DVD) with DivX/MP4 files on it is loaded, the 540D V2
will detect these file types and show a special folder navigation screen
as below:
Navigate the folders using the Navigation arrows () to highlight
the desired movie clip. Press Play or Enter to start playback of that file.
Note:
If there are multiple DivX/MP4 files in one folder you can also
select them by using 'Go To' on the remote then pressing the required
file number.
Once playing a file you can also use the Go To button. Press once for file
number entry, press twice to enter a specific time to jump to (as elapsed
time since start of that file).
During playback the Play, Pause, Stop and Forward/Reverse Scan
buttons work as for CD/DVD. Back and Forward Track Skip select the
last/next DivX/MP4 file in folder.
Getting started
Turn on the power of the TV, amplifier/AV receiver and any other
components which are connected to the DVD player. Make sure the TV
and the audio receiver are set to the correct input channel.
1. Press the Open/Close button to open the disc tray.
2. Place the disc on the tray, label side facing up.
3. Press the Play/Pause button. The tray will automatically close and
playback will begin.
For CDs playback will begin straight away at track 1. For DVDs, normally
the disc will go to the Title Menu which is the main menu recorded on
the DVD itself. This is where various disc options will be presented on
screen depending on the disc.
DVDs are normally split into one or more Titles, each subdivided into
Chapters. Each Title may also have alternative soundtracks and
subtitles available. From the Title Menu it is normally possible to start
playback of the main film, go directly to different chapters or access
special features.
Examples of special features are alternative soundtracks (Stereo or DD
5.1 for instance, perhaps DTS 5.1, also commentaries and different
language versions of the soundtrack) and subtitles. Also more than one
title may be available (different versions of the film or making-of
featurettes for instance). These features are encoded on the disc and
the options presented are entirely disc dependant.
Move around the options using the Navigation arrows (), select
the option that starts the film playing in the version you want and press
Enter.
4. Press the Stop button at anytime to stop playback.
Note:
• Do not put anything except a DVD/CD sized disc into the tray, foreign
objects may damage the mechanism.
• Do not force the tray by hand during the opening and closing
operations.
• To avoid dirt and dust entering the mechanism, keep the disc tray
closed when not in use.
• If the disc is seriously scratched or too dirty the player may not be able
to read it or play it.
• Never load more than one disc into the disc tray at one time.
Skip playback
1. Press once to skip forward by one track/chapter on the disc. Press
and hold to skip forwards through several tracks.
2. Press once to skip backward by one track/chapter on the disc.
Press and hold to skip backwards through several tracks.
Go To
Press the Go To button on the remote once to access Chapter Selection
then enter the required chapter via the numerical buttons. Press twice
to access Disc Time Selection and enter the required time from the start
of the disc as H:MM:SS (Hours, Minutes, Seconds). Press three times to
access Chapter Time Selection and enter the required time from the
start of the chapter.
Fast Forward/Rewind search
Press repeatedly to cycle between 2X, 4X, 8X and 16X playback speed
(without sound) and back to normal playback. Press button for
backwards playback options, or the button for forwards playback.
Slow
When playing a DVD, press repeatedly to cycle round the various speeds
of slow motion (1/2, 1/4, 1/8 and 1/16), forwards and backwards and
back to normal speed.
Repeat
Note:
The Repeat function is available only during playback.
Press the Repeat button on the remote to repeatedly play a single
chapter/title on a DVD video or a single track/entire disc on a CD.
The first press selects chapter/track repeat, the second press selects
title/disc repeat, the third press selects All repeat.
\
. .
FILE 1
FILE 2
FILE 3
FILE 4