Filter
Top Products
This VCR can be programmed to record up to 8 programs. For
programmed recording, the timer must be set for the starting
and ending times.
PREPARATION
• Make sure a tape is in the VCR and the safety tab is in
place, otherwise the tape will be automatically ejected.
•Turn on the power of both the VCR and the monitor.
• If you have a TV instead of monitor, turn on the power of TV
and then set the TV’s source selector to VIDEO.
The TIMER REC SET UP menu will appear.
DAY option
SUN~SAT: Same time once a week.
M-F or S-S: Same time during Monday ~ Friday or
Saturday ~ Sunday
DLY: Same time(s) every day
SET DAY START END SPD
OFF SUN 10:30 11:30 L6
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
(UP) (DOWN) (ENTER) (MENU)
21
RECORDING
TIMER RECORDING
1 Press MENU and the main menu will appear.
2 Press the DOWN or UP to choose the TIMER REC SET
UP item.
3 Press ENTER to enter the TIMER REC SET UP menu.
4 Press ENTER to select the SET item then press DOWN or
UP to choose ON or OFF. Activated Timer Recording only
when the SET item set to “ON”.
5 Press ENTER to move to next item and then set the next
items (day, start time, end time, recording hour) by using UP,
DOWN and ENTER buttons.
MAIN MENU
TIMER REC MODE MENU
MENU
VCR SET UP
REC MODE SETUP
TIMER REC SET UP
ALARM SET UP
POWER FAIL RECALL
LANGUAGE ENGLISH
(UP) (DOWN) (ENTER) (MENU)
SET DAY START END SPD
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
OFF - - - - - : - - - - : - - L6
(UP) (DOWN) (ENTER) (CLEAR)
6 Press MENU when finished. Press MENU repeatedly to exit
menu screen.
If you are finished programming and you want to set the VCR
to record the programs you have entered. A) MAKE SURE
YOU HAVE INSERTED A TAPE INTO THE VCR. B) YOU
MUST PRESS TIMER BUTTON BEFORE IT WILL RECORD
ANY TIMER PROGRAMS (TIMER appears). The VCR is now
set to record the preset programs.
SHARPNESS
HARD
POWER
TIME/CNT/REM
ALARM/INDEX
COUNTER
CLEAR
TIMER
V-POS
REC/PLAY HOURS
CURSOR
TRACKING
H-POS
MENU
ENTER
SOFT
LOCK
ON OFF
NOTES:
• If you want to stop
recording during the
Time recording,
press
STOP
button
more than 3 seconds.
• If you press
TIMER
button, the Time
Lapse’s power is
turned off. After fin-
ishing
Time record-
ing,
the Time
Lapse’s power is
turned off again.