Filter
Top Products
W260F8U/W320F8U/W370F8U
PAGE 13
Fine (This option would be in gray ,which means invalid to operate in the current
mode)
When the picture and sound of a channel are not satisfactory after Auto Search or Manual
Search, please use the Fine function.
Note:
During auto search, manual search, and fine tune operation, you will be asked to enter the
password if any program is locked.
Channel Table
Two kinds of program list, Air & Cable for you to choose, 2~69 for Air list, and 1~125 for
Cable list. (for U.S.A users)
Auto Scan
In TV mode, select Auto Scan to activate the scan mode. All pictures will be displayed in the
current channel. The current program will be displayed in the middle of the screen, with
twelve small pictures around the middle picture. All pictures are scanned, beginning with the
current program, from the upper-left side screen in clockwise direction. Use 【P+】/【P-】
and【V+】/【V-】to select the desired channel; Use 【OK】to exit from the Auto Scan mode
and watch only the selected channel. Use【MENU】to exit from the Auto Scan mode directly.
Exchange (This option would be in gray ,which means invalid to operate in the
current mode)
Using the Picture Setting Menu
1) Press【MENU】and then use 【V+】/【V-】to select the
Picture Setting menu.
2)Press【P+】/【P-】to make the desired adjustment.
Full light Watch
Adjusts the brightness of the LCD TV according to the
environment.
Picture Mode
Four modes to be selected: Standard, Mild, Bright, User.
Brightness
To adjust the picture’s brightness.
Contrast
To adjust the picture’s contrast.
Saturation
To adjust the picture’s saturation.
Sharpness
To adjust the picture’s definition.
Hue
To adjust the picture’s tint. (For NTSC signal only)