Changhong Electric W260F8U, W320F8U, W370F8U Flat Panel Television User Manual


 
W260F8U/W320F8U/W370F8U
PAGE 19
Scaler Mode
Switch among Fill-screen, 4:3, Wide, Cinema and Subtitle modes.
STILL
PressSTILLto freeze or unfreeze the current image.
Program Scan
Press SCANto browse TV programs, this function is the same as “Auto scan” in Channel
Setting Menu
Favorite channel
Press FAVORto select or set your favorite
channels as show in the right picture
You can pressP+/P-to select the desired Item.
Mode
To select Mode Item, press V+/V- to select
Auto or Manual Mode.
(1) In Auto mode, the channel is auto sorted by the
time, if we watch the channel over ten minutes, it will be set in the first position.
(2) In Manual mode, you can press digit keys on the remote control to edit each channel. In
edit status, you may press MENU to exit or press OK to confirm your operation, and
then the channel you edited will be set.
Once you enter into the selected Channel item, the channel will be set
You can press any button ofMENU,OKto exit from the Favorite Menu.
MTS switch
You can press (I/II) to select among Mono, Stereo and SAP, in each channel ,Stereo and
SAP mode your selection will be stored.
CCD
PressCCto select the caption optionsame function to Close Caption item of the menu.
PIP/POP/PBP Function
Press
to enter into or exit from the sub-picture mode. In this mode, you can realize
these functions as follows:
1. Press
to switch the sub-picture signal source among TVAV1AV2YPbPr
PC and DVI in cycle.
2. Press
to switch the sub-picture mode among PIPPBP and POP.
PIP Mode: To overlap a sub-picture (PIP) in small size wherever you want to locate ;
PBP Mode: To place two pictures in the same size side by side. Both main picture and
sub-picture (PBP) cover half of the display screen area.
POP Mode: A main picture covers 12/16 of the display screen area while a sub-picture
(POP) covers 1/16.
3. Press
to switch between main picture and sub-picture.
4. Press
to freeze or continue the current sub-picture .
5. Press to adjust the sub-picture position on display in PIP mode.