Filter
Top Products
W260F8U/W320F8U/W370F8U
PAGE 15
Language
To select the different languages displayed
OSD H Position
To adjust the OSD position horizontally
OSD V Position
To adjust the OSD position vertically
OSD Timeout
To adjust the length of time the OSD to be displayed on
the screen without any commands
Blue Screen
To set the Blue Screen on/off when there is no signal
input in TV, AV, AV1, AV2, YPbPr modes
Close Caption
Only valid for U.S.A users
Scaler Mode
To select viewable screen modes of Fill Screen, 4:3, Wide, Cinema and Sub Title.
Factory Reset
All users’ settings can be reset to the default settings except the TV programs
Transparency
To adjust the OSD transparency
Using the Timer Setting Menu
1) Press【MENU】and then use 【V+】/【V-】to select
the Timer Setting menu.
2) Press【P+】/【P-】to make the desired adjustment.
Sleep Time
To set the sleep time of the TV. This can be set with the
remote control 【SLEEP】button.
Current Time
Press【OK】/【V+】to enter the mode.
Press【V+】/【V-】to set the Minute/Hour and press【P+】
/【P-】to adjust the time value.
On Time
Press【V+】/【V-】to set the Minute/Hour and press【P+】/【P-】to adjust the time value.
On Channel
To set the default channel when turning on the TV. Press【V+】/【V-】to change the channel
number.