Chief Manufacturing PRO-2000 TV Mount User Manual


 
Installation Instructions
2
IMPORTANT WARNINGS AND CAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: It is the installer’s responsibility to make sure structure to which this mount is attached can support five
times the combined weight of all equipment. Reinforce the structure as required before installing the accessory.
Failure to provide adequate structural strength for the mount can result in serious personal injury or damage to
equipment!
WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed using
instructions provided. Failure to follow instructions can result in serious personal injury or damage to equipment!
WARNING: It is the installer’s responsibility to make sure combined weight of mount, display, and all attached
equipment must not exceed 200 lbs (90.7 kg), the maximum support weight of this mount. Exceeding maximum
support weight can result in serious personal injury or damage to equipment!
WARNING: Watch for pinch points. Do not put your fingers between movable parts.
WARNING: Make sure the Q-Latches securing the display are fully latched at all times except when removing or
installing the display. The Q-Latches must be fully latched when installing/removing cables.
CAUTION: Check the unit for shipping damage before you begin the installation.
DIMENSIONAL DRAWING