Filter
Top Products
Installation Instructions RMF2/RLF2/RXF2
11
Figure 11
3. Unlock kickstand by pushing up on interface brackets until
kickstand rests against the wall. (See Figure 11)
4. Push up on the interface brackets further in order to lock
display into position against wall. (See Figure 11)
5. Straps can be tucked behind display on notch on interface
brackets (B) after installation is complete so that they will
not be visable to the viewer. (See Figure 9)
6. (Optional) Route padlock or cable lock (not included)
through bottom holes on interface bracket to provide
additional security. (See Figure 11)
3
4
locked
position
6
(views from left side)
kickstand
against wall