Cisco Systems 2.1 TV Cables User Manual


 
Chapter
6
72
Chapter 6: Using the Phone Application
Changing Individual User Settings and Templates
Linksys One Communications Solution
available if SNR is not authorized for this user on the Users > SNR or Users > Permissions
screen.
Enable
Enables SNR for this user. This checkbox is mirrored on the Users > SNR screen and on the
Call Forwarding / SNR task for this user’s phone. A target for the call must be specified as
defined below.
Target
Steering digit and phone number of the SNR destination. This SNR number is mirrored on
the Users > SNR screen for this user.
To enable SNR for a user:
1. For each user, click an Enable checkbox ( ).
2. Enter an appropriate steering digit and SNR number.
3. Click Commit.
NOTE: The SNR feature is not available
for FXS devices.
NOTE: A steering digit must precede the
SNR phone number. For example, if the
SNR phone number is 214-555-1212
and the steering digit for an IP Trunk is
9, then the number to enter into the
Target field would be 9-214-555-1212.