Filter
Top Products
TB741P/TB742P/TB743W 23
English
Installation and Wire
connection manual
5. INSTALLING THE MAIN UNIT
■
Universal Mount
1. Place the universal mounting bracket into
the instrument panel, use a screwdriver to
bend each stopper of the universal mounting
bracket inward, then secure the stopper as
shown in Figure 6.
2. Wire as shown in Section 8.
3. Insert the main unit into the universal
mounting bracket until it locks.
4. Mount the outer escutcheon so that all the
hooks are locked.
Notes:
1) Some car models require special mounting kits
for proper installation. Consult your Clarion
dealer for details.
2) Fasten the front stopper securely to prevent
the main unit from coming loose.
182 mm
53 mm
Instrument panel
Rear fastening hole (of vehicle)
Hole
• Console opening dimensions
Figure 6
Hole
2–Springs
Outer escutcheon
Special screw
Rubber cap
Stoppers
Stoppers
Screwdriver
Universal mounting bracket
Main Unit
Note:
Set the outer escutcheon so
that its metallic part on the
back side fits the upper edge
of the main unit.