Filter
Top Products
English
English Owner’s Manual
VX401E/VZ401E
43
TV/VTR (When connecting an optional TV tuner, etc.)
Problem Cause Measure
The image is not displayed. The parking brake is not
engaged.
Check that the parking brake
is engaged.
The display is dark. The brightness control is too
low.
Adjust the brightness properly.
The operating condition is not
good.
The temperature inside
the vehicle may be 0°C or
lower. Set to an appropriate
temperature (25°C or so) and
check it again.
The headlight of the vehicle
is lit
The display is made dark at
night to prevent the glare
(When the headlight of the
vehicle is lit in the daytime, the
display gets dark).
When the VTR is connected,
the image is disturbed.
Improper NTSC/PAL setting Set the AUTO/PAL/NTSC
properly according to the VTR.
There are red, green, and blue
points in display.
-------------------- This is not a failure, but a
phenomenon peculiar to a
liquid crystal panel (The liquid
crystal panel is produced
according to technology with
very high precision. Note that,
though there are effective
pixels of 99.99% or more,
pixel missing or normally lit
pixels account for 0.01%).
VX_VZ401E_EN_GE_FR_IT_ES_multibook.indb 43 4.8.2010 22:03:17