Filter
Top Products
English
50
VX401E/VZ401E
Installation manual
6. Cautions on Wiring
1. Be sure to turn the power off before wiring.
2. Be particularly careful where you route the wires.
Keep them well away from the engine, and exhaust
pipe, etc. Heat may damage the wires.
3. If the fuse should blow, check to see if the wiring is
correct. If a fuse is blown, replace it with a new one
of the same amperage rating as the original (15A
FUSE).
4. To replace the fuse, remove the old fuse on the back
of the unit and insert the new one. (Figure 8)
NOTE:
There are various types of fuse holder. Do not let the
battery side touch other metal parts.
Figure 8
Fuse (15A FUSE)
After the connection, fix the cord by a clamp
or insulation tape for protection.
Fuse holder
CAUTION
VX_VZ401E_EN_GE_FR_IT_ES_multibook.indb 50 4.8.2010 22:03:19