Filter
Top Products
ClearCube F6151 Media Converter and Chassis System
4 User’s Guide
Installation
Selecting a Site for the Equipment
As with any electric device, you should place the equipment where
it will not be subjected to extreme temperatures, humidity, or
electromagnetic interference. Specifically, the site you select
should meet the following requirements:
• The ambient temperature should be between 32 and 104
degrees Fahrenheit (0 to 40 degrees Celsius).
• The relative humidity should be less than 90 percent,
non-condensing.
• Surrounding electrical devices should not exceed the
electromagnetic field (RFC) standards for IEC 801-3, Level 2
(3V/M) field strength.
• Make sure that the equipment receives adequate ventilation.
Do not block the ventilation holes on each side of the switch
or the fan exhaust port on the side or rear of the equipment.
• The power outlet should be within 1.8 meters of the switch.