Filter
Top Products
ClearCube F6151 Media Converter and Chassis System
6 User’s Guide
Replacing Media Converters in a Chassis
The chassis is shipped containing 16 media converters. Each media
converter is attached to a media converter carrier, which is already
fitted into bays of the chassis.
The following steps describe how to attach a media converter
carrier to a media converter if you need to replace a media
converter.
Step 1: To install a media converter onto any of the carriers, you
have to unscrew the carrier from the desired bay first.
Step 2: Fit the media converter onto the carrier.
Step 3: When the media converter is completely seated onto the
carrier, insert the carrier to the guide rails of the bay slot.
Step 4: Carefully slide in the carrier until it is fully and firmly
fitted to the power socket. Fasten the screws on the carrier.
L
i. The chassis is designed to house only the proprietary
media converters.
ii. Never insert any media converter into the chassis
directly without using the supplied carriers. These
carriers allow secure and consistent placement of the
media converters into the chassis’ backplane without
causing any damage.
iii. For details, please refer to the User’s Manual for media
converters.
For more information about media converters, see “Media
Converter Overview” on page 9.