Filter
Top Products
ClearCube F6151 Media Converter and Chassis System
User’s Guide 7
Connecting to Power
POWER SUPPLY
The chassis ships with two power supplies. When the chassis is
equipped with two power supplies, you can have the following
advanced performance.
♦ Hot Swappable –
The design of the power system is based on an idea of
providing maximum flexibility and redundancy. In this way,
you may remove any of the two power supplies without
turning off the system.
♦ Redundancy –
During operation, both power supplies are switched on and
share the current load. In case that one of them should fail, the
other will instantaneously take 100% of the load without any
loss. Similarly, if one power supply is removed from servicing,
it can be switched off and removed while the chassis continues
functioning.
♦ Protection System –
The power of each converter bay comes from the two shared
power supplies. Each bay is isolated from each other under a
certain protection mechanism, so that it is free from any
problem that might occur to the power supplies or faulty
converter bay. This is the best solution to protect your
investment in media converters.
CONNECTING TO POWER
The chassis system is equipped with two power supplies.
Step 1: Connect the supplied AC power cord to the receptacle on
the front panel of each power supply.
Step 2: Attach the plug into a standard AC outlet with a voltage
range from 100~240Vac.