Filter
Top Products
Contents
- 27 -
You can navigate through these options by using the Enter key.
While utilizing the PAN / TILT option, use the direction keys on the Front Panel,
or the remote controller.
In ZOOM mode, the up and down keys (T, S) are used as zoom in and zoom
out, the left and right keys(X, W) are used to adjust the focus of the camera.
Ú For more information about PAN / TILT and ZOOM, please refer to the
manual supplied with your camera.
5-5-3. Auto Sequence Display
When Auto Sequence Display mode if toggled, the display screens will be
displayed in sequence (Quad p C1 p C2 p C3 p C4 p Quad).
The Auto Sequence Display will stop if the user presses a button on either the
Front panel or the Remote Controller.
Ú The OSD button will not stop the Auto Sequence Display, because the
OSD is not programmed to toggle during Auto Sequence Display mode.
Auto Sequence Icon