Filter
Top Products
Contents
- 55 -
6-4-2. Sensor Setup
The Sensor (PIR: Passive Infrared) Setup is to set when the alarm should trigger.
To enter the Sensor Setup, press menu to enter the main menu, select the
Sensor option using the Up / Down button and press enter.
In the Sensor Setup menu, the user should use the Up / Down button to select
each Sensor and the Left / Right keys to change the value.
After Setup is complete, press the Menu button twice and select Exit & Save
Changes to apply the changes.
When the Sensor is set, the icon will show at the bottom of the screen.
If the Sensor is triggered the icon will show at the top right corner of the
camera screen where the sensor is linked to. (In this case, the sensor linked to
camera 3 is triggered)
Alarm
Sensor