Filter
Top Products
Page 16 Coby Electronics Corporation www.cobyusa.com Page 17
Page 16 Coby Electronics Corporation www.cobyusa.com Page 17
CONNECTIONS
The DVD player is equipped with composite Audio/Video (AV) outputs lo-
cated on the rear panel (yellow/red/white). Your TV will require at least one
set of AV inputs. The supplied AV patch cable will connect your player’s AV
outputs to your TV’s inputs.
If your TV does not have AV input jacks, you may need to purchase
an RF modulator.
Depending on the model, the DVD player may be equipped with either 2-
channel stereo or 5.1-channel surround sound outputs. Stereo or surround
sound will require a Stereo TV or Surround AV receiver, respectively.
For Mono TVs, you may connect either the Left or Right stereo audio
output to the Mono TV’s audio input.
You will need to set your TV to the correct input line for use with the DVD
player; depending on the brand of your TV, you may need to press a but-
ton labeled Line, Input, or Video/TV. This will switch the TV from broadcast
reception mode to one of the AV input signals. Some TVs may have more
than one AV input line.
The DVD player has built-in copyright protection technology that
prevents copying from a DVD disc to any media. If a video recorder is
connected to the player, the video output image will be distorted dur-
ing recording.
•
•
•
•
•