Filter
Top Products
Page 22 Coby Electronics Corporation www.cobyusa.com Page 23
Page 22 Coby Electronics Corporation www.cobyusa.com Page 23
BASIC OPERATIONS
All key instructions refer to the remote control unless indicated otherwise. Some
operations may be controlled by the buttons on the main unit.
Basic Playback
Prepare the connections and power supply.
Press to turn the player on.
Select the video line.
Set your TV to display the video line connection that corresponds to your
DVD player (e.g., AV1, AV2, Component, S-Video, DVD, etc.) The DVD
output will be displayed on the TV screen when the proper line has been
selected.
If the DVD player is connected to the TV through an RF modulator,
select the appropriate channel on the TV (usually Channel 3 or 4).
If the audio output of the DVD player is connected to an amplier,
select the appropriate output mode of the amplier.
Load a disc.
Press to open the disc tray. Insert a disc with the label-side up. Press
again to close the disc tray.
If a single-sided disc is inserted upside-down, the player will display
“NO DISC” or “BAD DISC”.
Start playback.
Press to start playback.
Some discs may start playing automatically or display a DVD menu
specic to the disc. If a menu appears, use the Navigation Keypad to
select a desired feature or option and then press to conrm.
Play/Pause/Stop
Press to play the disc for the rst time.
Press during playback to pause. Press again to resume playback.
Press during playback to stop the disc (“Pre-Stop”). Press to
resume playback at the time-point at which the disc was stopped.
1.
2.
•
•
3.
•
4.
•
•
•
•